Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
When we have a 7800 or 8800 series phone connected over MRA and it is on a call with a user on a jabber client if either end point puts the call on hold the call drops when the call is taken back off hold. Has anyone seen anything like this before?
Hello, A customer call came in today to a high ranking exec who shouldn't have received the call. It originated on the execs personal line and bounced through transfers finding it's way into a service queue. It was requested to trace out the call fro...
Hello everyone Quick question Can the 8800 IP phones series phones mask the DTMF tones made by pressing a number button in speakerphone mode? (e.g. while navigating on IVR menus and when dialing FACs). This is desired for security reasons. Thanks ...
Is it possible to restore CUCM cluster from a working environment to a work environment? The reason why i am asking is because i am stumped doing this. I've been trying to do this via the DRF page but its not finding the TAR files. I backed up the wo...
Cisco 3905 problema para transferir chamadas externas Um cliente meu está com problemas nos telefones modelo 3905 quando receber uma chamada externa que eles vão transferir a chamada, ela cai. Eles têm 213 dispositivos e todos estão com este problema...
I have new installation CUCM, Unity Connection and Voice gatway. Calling from PSTN heard similar words "Tryout or Trial" while call connected. It can call normally but will hear sound every 5 sec. Voice gateway have FXO ports. It occur with many port...
Hi,We have an issue for our customer, you can see the topology in attachment file. In this network we have ip phone 7821, 7942 and 8831 linked to a router 2921 with c2900-universalk9-mz.SPA.154-1.T1.bin and CME10.5. The issue is about the support and...
CISCO IP Phone with SIP 7942 , 7962 , 7975 not showing VPN options under Security , SCCP is fine We use IP SSL to connect to ASA but we cannot get the SIP phone to show the vpn options Any ideas? Checked SIP profile and templates , Common Phone Pr...
Hi, I have been using this setup succesfully for years running on CUCM 6 but since I installed a fresh CUCM 8.0 copy everything works fine accept making outgoing calls. There is nothing changed on my Cube up to now. Setup: CUCM 8.0.3.21900-8 -> SIP t...
Hi Guys, I need to connect two sip trunks in one CUBE router & route particular set of numbers through one sip trunk & second link for all other numbers. Can i do with one CUBE?
Does Cisco 9951 support call recording? I have configured line 1 for recording . We are using Knoahsoft for call recording. It is not getting recorded. All other models are getting recorded.
Hello, I have one cluster of CUCM 8.6.2 that is showing this message Licensing Warnings: System is operating on insufficient licenses. Please upload additional license files. The Node License Remaining is -1, because the client add a subscribver with...
Hi All, I'm about to integrate our AD into CUCM for it's directory. Ideally I'd like to do a test run, but encountered many problems when trying to login to a vm clone of CM so I sacked it off. So now I just want to go for it, but am concerned how...
Dears, I am on unity connection 8.6.2ES145.25900-145 Unrestricted i want to move to 11.X restricted,the direct upgrade after installing a COP RSA v3 will be accepted, or there is no way to upgrade from unrestricted to restricted. when i installed fre...
Hii'm using cucm and CUC 10.5 and mcgp as gatewayi configured DN:1000 with call forward no answer (10 second) to voicemailwhen i call form intern it work well but from extern no regrads
