Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
How to Configure Cisco Unity Connection for multiples CCM Cluster for voicemail ? Please HelpThanks.
Hello Team,I have an inquiry about upgrading licenses from BE6K based CUCM to Enterprise CUCM. (I'm not talking about hardware nor software, just the licensing upgrade path component).Let's say my customer has 1000 licenses and he is going to buy the...
Hi,I am in trouble with a routing in a network.I have a firewall which is in charge of a routing in a network. I want to integrete ip telephony with a CCME.Does I need to configure router on a stick in my CCME router or I have to configure two separa...
I have Cisco IP Phone CP-6921 and 7965 and few more Cisco phones earlier used with Cisco call manager and now we want to use them with Asterisk Based PBX, can any one please help how to change firmware and how to configure these phones to work with A...
i config the dial-peer like this dial-peer voice 1007 pots translation-profile incoming CallBack call-block translation-profile incoming call_block call-block disconnect-cause incoming call-reject incoming called-number 843791... fax rate disable dir...
I have a c2951 router with 2 PVDM3's that show up in the output of the "show inventory". They do not show up in the output of "show voice dsp summary". My ISDN E1 link is up, but no calls succeed.The "show voice port summary" looks like the ISDN li...
Hi Guys, My Customer informed to me that is having the following problem: when a user call to 9971 in the first try him hear the "message unavailable", in the second try worked without problem. The actual firmware is 9971.9-4-1-9 Can be firmware ver...
Dear all, My client would like to setup either 'Abbreviated Dial' or Global level speed-dial on their CME 10.0 for their Cisco SIP Phones (i.e. Cisco 7821). Is this possible? Would be great if someone can share some sample config on how to accomplis...
One of our customer has a SIP trunk for inbound/outbound calls. They are having an issue with call dropping after like 75 minutes. The duration is not confirmed as sometimes it drops even before 75 minutes.They had the same issue before when call use...
Hi,Need to understand how partition and CSS is working in Unity Connection 11.0I have two call handler in the same partition and the same CSS one on ext.5201 and the other one 52025201 is the main number Backdoor5202 is an overflow of an ext. in CUCM...
Can i change the banner from telephone cisco 7942 and erase the directory number? Attached the image and red line show the DN that need to erase from display
We use a CISCO IP phone series 7912 at work. I have a hearing problem and am using Phonak hearing aids. Are there any Bluetooth "gadgets" that can connect my phone to my hearing aids? Many thanks.
I uploaded device pack 10.3.2 to CUCM ver 9.1.2. I have added the phone to Call Manager. The phone is stuck trying to register.
I have question regarding Cisco phone config-I have 2 phones configured in CCM 9 with Unity Express. User would like to play a message something like 'all lines are recorded' before their phone rings!!! Is this possible? There are NON Contact Center ...
Is there a way once set to change a single FXS port in a VG224 without affecting all the other 24 total ports as configured via MGCP in Callmanager 10.x. For example if we have 12 ports fully configured for Loop Start and someone accidently set for ...
