IP Telephony and Phones

Guys, I am unable to see missed, placed ...calls on my Cisco IP Phone 7962 firmware version:SCCP42.9-3-1SR2-1SCUCM version:  8.6.2.24084-1Protocol: SCCPI know that the call history are stored localy on the phone. What can be the problem? When I ring ...

Hey team, I have a MGCP trunk working properly. All features are working, but the call back is working in the direction Cisco for Siemens only. For example: If I make a call from a Cisco IP phone for analog phone via MGCP and I press call back , it´s...

Hello,We have a an ISP who is requesting Partial Rerouting to one of our customers.The customer is running a 7.X call manager with MGCP.Is Partial Rerouting supported on a MGCP Call Manager, if yes how do you commence to start configuring this, or do...

can we enable DND service on a Huawei sip phone registered on call manager 7 as third party sip phone. regards

Will a VWIC-1MFT-T1 card work with 15.1M on a 2811?

Hi,I have a 3rd party SIP Server that I need to move a 7942 phone to.  The phone is currently registered with CUCM 8.6 and the phone is configured with SCCP firmware.  Here are the questions I need help with:1. Do I have to do a factory reset to get ...

I am trying to find what is the best way to implement FXO ports in CUCM/MGCP environment.I have a 2801 voice router setup as MGCP on CUCM 8.0 and i also have FXS and FXO ports on this router. FXS ports will provide analog endpoints and FXO will be us...

Hello,we are using Extension Mobility on all our IP Phones (7962). This works perfectly. But now we want to try Singe Number Reach. I've read some Cisco Manuals and every one said, that I have to define a Phone Device device to Enable Mobilty - Prima...

Dears,Kindly how I can change the application login username/password, advise?Sent from Cisco Technical Support iPad App

Hi,I am using SIP and wish to configure my 7960G's to ring chirp1.pcm on an incoming internal call and to ring chrip2.pcm on an external call.Is that possible by using some xml file on the SIP server?Thanks

Good day,(I'm new to this form, so forgive me if I'm not providing sufficient information or if I request followup on instructions or features)I have some users report that their calls are not hanging up when they press the end-call button.  A user c...

hi,Does anybody know the impact if we set this service parameter in CallManager 7.1.3 : Build CNF Files =  Build All     and       Enable Caching of Constant and Bin Files at Startup = False  ?We have to do troubleshooting to remove the cache of TFTP...

Hi Support CommunityCannot find this information anywere online. We are currently using CUCIMOC and are looking at the options of upgrading to either CUCILYNC or Cisco Jabber. Jabber seems to still be playing catchup with Lync with some noticeable li...

                   Dear All,I have a one problem in Cisco 6945 series phone...Nothing is showing on display..but phone is registered with CUCM and working fine...Kindly let me know the solution....Thanks in advance

Hi,    How can disable the "hook key" in the IP phone? to be more precise, if someone answers a call they shouldn't be able to disconnect it, i have disabled the "Endcall" button in the softkey template. But still the call can be disconnected by off-...