Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We have recently configured SIP trunk in our organization. However we noticed if some PSTN number is out of order or busy it rings first then give you busy tone. I think it is a SIP generated ring tone. Can somebody help me to resolve this issueCall ...
I have added a new directory number & I need to add it to one of our line groups. Can someone point me the way?Callmanager 8.0Scott
I am running CUCM 8.5 and have a pub and 2 subscribers.Web browsing to the Publisher and performing a "find all phones" based on the Directory Number displays only registered phones on Subscriber 1. If I web browse directly to subscriber 2 I then see...
Is there a way to force a call to hit a MGCP / SIP / H323 gateway when the call is made between 2 phones registered to the same Call Manager? If so, is there any sample Gateway config to force such a call?
Hi Folks:Is there a way to find unused phone that is configured. In simple way, the phones configured but registered never.If yes How?
Hi, I am receiving the below error for one of my MCS in the cluster. the following HardwareFailure events generated: hwStringMatch - HP Insight Management Agents Trap Alarm: Accelerator Board Status Change: Slot 1. hwStringMatch - HP Insight Manage...
Hi ,Thanks in advance
HiWould it be OK if I configure DNS for cucm/unity connection and presence server clusters ( version 9.1) without a domain?when I am about to configure DNS, it gives me a message saying the domain name should be configured.thanks,hamed
Hi All,There is an issue with the FXO port. Users are not able to make the outgoing calls from FXO numbers.when they try to make the outing calls they listen blank and after 6 to 10 sec. Call got automatically disconnected.I have taken the debug for ...
Hello Guys,Would like your help since i found very few documentation/support on the internet about that.The guys from my company want to deploy 130 notebooks running over a wireless network.We will not use ip phones but ip communicators as communicat...
Dear Team, Issue in Right FAX. Call manager not forwarding some of the faxes?But we are able to call from the cisco ip phone on the same numbers. Best Regards,Waqas
Intermittent incoming call drop out on answer. Call flow as below:ITSP--SIP--CME--SIP-99712900-universalk9-mz.SPA.152-4.M1.binDebug ccsip message and ccapi inout as attached for both working and failed calls.RegardsFei
Guys, need backup!I'm setting up a ICT between two CallManagers Clusters (Brazil and NY). The calls are working from Brazil cluster to NY Cluster but not the reverse. I'm attached the logs from NY Cluster!Cheers,Felipe
We are attempting place calls internally by dialing the 7 digit extension at any of our remote sites From our HQ. All cites are registered to Cisco Call Manager v8.6. When you place the call, it goes through and is abled to be answered. You can see ...
Hi IPTEL gurus,Would appreciate your help with the following issue:Running CUCM 9.1(a) with SCCP 8945 and 6945 phones.Physical devices have Extension Mobility service assigned to last phone button and the button/service works fine.Phone profiles defi...
