Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi there,I'm attempting to install Unity Express 8.5 on a 2911 but it's failing. I guess the module cannot connect to my FTP server after the ISM reboot, but before rebooting it can download some files for pre-install. I don't see where is the pro...
Hi,I get a call on my ip phone, i don't pickup & the result is a "Miss Call"--thats fine..But after few seconds the Miss Call notification is gone automatically from the phone & i can find "Your Current Options".....So there is no way that i can come...
Hi Networkers !!! I have been trying to set up a basic voice lab with 2621XM and 3524XL (WS-C3524-PWR-XL). I am not able get the switch and router talk to each other. I am sure that this is something to do with VLAN and Subinterface Configuration b...
Hi all,We have recently purchased some APC-4 Plantrnoics cables to replace the hookswitch lifter (HL10A) to work along with the Plantronics CS70/A but I cannot get the 7940's working properly. I have tried it on a 7945 and after I enabled the hooksw...
Hello,i am looking for a solution to add a "0" automatically to phone numbers when dialed from the personal directory .I have tried the Directory Lookup Dial Rules Configuration but it didn't work...or something was missing.Example:Entered in the Pe...
Hi,I'm trying to configure a SIP trunk between CM5.1 and CME.I have a bit problem with call classification.When calling from CME to CM is identified as OnNet/Internal call, but calling from CM to CME is OffNet/External call (ringing in short pitch).I...
I have a problem in deploying AutoAttendant function on the Cisco2921 CME router in Dubai. The CME router connects the PSTN line with the FXO module, and AutoAttendant uses ITS-CISCO2.0.2.0.tcl. When having confirmed it with debug voice application d...
Hi all,I description my phone system: One Cisco Unified Communications Manager, One Cisco Unity Connection, One Lync Server. CCM integrates with CUC through SCCP. CCM integrates with Lync Server through SIP trunk.When I call from outside to my phone ...
I have the Primary/Publisher UC server installed up and running, and have everything added for the subscriber per cisco documentation, after which I am performing an installation of subscriber server, same hardware same software. Identifying as secon...
I have successfully configured Phone View on Unity Connection 8.5(1).My CUCM is also 8.5(1).I am able to 'Search' and obtain a list of voicemails which are displayed on the LCD of the phone (7975 in this case).However, when I select a VM to actually ...
Hi,I would like to preauthenticate calls that flow through a CUBE (Cisco Unified Border Element). It however seems to be that the 'aaa preauth' command only can be configured in AS5000s.Accounting works great using AAA-lists. Based on this document: ...
Hello I have doubt how can I configure in AA TCLwith Gateway to call at option 4 and also I need to call to extension in range 4…, my problem is the whe to press 4 always to translate to 4119 never I can to calls a other extensions 4… applicationse...
We have upgraded to CUPC 8.02 and downloaded the CUPC 8 Client. The client is installed in Windows 7 but does not load, just sits at the loading screen then times out after a minute or so. I have follwed the install guide but cannot get this thing wo...
Hi,I have Publisher & Subscriber placed over WAN, but having IP from the same subnet (Same VLAN is propagted between 2 sites). Due to some requirement, i need to change the IP of Subscriber..Can i do this?? Do i need to reinstall subscriber after cha...
Hello I was wondering if anyone has had an issue with a delay on H323 gateway. When the call is answered there is a slight delay. The caller doesn't hear the called person right away. They called person says hello a few times before the caller hears ...
