Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
CUCM version 7.1(3)When adding a new phone getting the following error:Add Failed. User Defined Routine 9licenserequest) execution failed.there are plenty of licenses. This is happening for any type of phone. Have restarted the CM service on both p...
Hello all, Have you ever run into this before? I have a call manager subscriber that we are trying to upgrade. for some reason or other the server could not see the sftp server. So we did a reboot when it reboots it starts to boot up normally.it lo...
Is broadcast paging to phones available on CUCM 7.1? Everything I am researching is stating this feature no longer exists. I was just wondering if anyoneout there has configured this beyond 6.x?We are unable to do overhead paging in this leased fac...
I have a STE analog secure phone which is connected to a analog voice gateway vg248 and CUCM 7.1.5 using mgcp. When opening a secure line it disconnects after about 30 seconds, but non-secure works fine. Configuration appear to be in order (v150 opti...
Noticed that the 6900 phones do not have mounting lugs for a standard wallmount. There's a kit available (Charcoal Locking Wallmount Kit for 6921 & 6941, CP-WMK-C-6900=), but I'm wondering if this is our only option. Anyone else wallmount these witho...
Hi expert,I have UC320W, I have a problem with dial plan digit. in my country digit number for mobile phone 15. how to setting the dial plan ?Thanks & Regards,Yusuf
I've got no hardware so can't check it myself for the minute.It's an attempt to achieve what i've discussed in my previous post.Using 2801'sMain Centre Router interface fast eth0 ip address 172.16.101.148ephone-dn 100 number 7201 call-forward all 02...
I am having trouble with making outbound calls on BRI with an 1861 in spain.I can make inbound calls OK.But when i try to call out, i get the following errors ISDN BR0/1/1 Q931: Ux_DLRelInd: DL_REL_IND received from L2 ISDN BR0/1/1 **ERROR**: L"_Adva...
Hi All,I Have an UC500 with ios 12.4(11)XW4 and i upgrade to IOS 12.4(22)YB8 to migrate from CME 4.2.0 to CME 7.1.0The ios installed succefully and I'm now with CME 7.1Also I want to upgrade GUI files from 4.2 to 7.1I download GUI files for CME 7.1I ...
Dear all,My main Cisco call manager 5.x is in head office where ISDN PRI is terminating from ISP. one of my other office has also Cisco call manager 8.x. both the offices has Fiber connectivity in between. now my main problem is, i establish SIP trun...
hi alli want to bill the duration of call , ineternational calls , so that employees can be tracked for any illegal usage.any guidence on how to achieve this . (cucm 7 )Thanks
Deal all, can you please help mi in seting up real time call monitoring, i am looking for some software or some web based application which can tell us how many calls flows are currently there, channels free. time connected, extension online offl...
Hi, Whats the difference b/w Application Load ID and Boot Load ID for an IP Phone?
Hi team,We have a 4 offices moving into one location ,the larger office have aCCM 5.0.4 wi 300 users and 3 other office with CCME.now the CCM is end of hardware supportso i belive we could go in for new servers as set up will be new and ccme would be...
Hi Everyone,This is my first time to post and seek assistance from you guys. I am also a newbie when it comes to call manager administration. Here is what i haveCall Manager 6MGCPCisco 2821A Number = Calling PartyB Number = RedirectedScenario:Caller ...
| User | Count |
|---|---|
| 6 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
