Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Guys,We would want around 5-6 Cisco phones to automatically get IP address from the DHCP scope defined in our Cisco Core switch. I know one can achieve this by the exclude command but this would mean I will have to manually enter IP address on the ph...
Hello All,How can I do a bulk update of USer Profiles with BAT on CUCM 7.1.3?Thank you in advance.
I received a couple of these alerts last night for the publisher and one subscriber.All servers in the cluster are IBM 7825-I3, running CUCM 7.1.3.Is this something I should be worried about?Processor load over 90 Percent. slp_srvreg#1 (48 percent) u...
Hi,I try to use dns for balancing and fault tolerance third-party SIP phones (e.g. x-lite).I've configured dns with srv recordsIN NAPTR 90 50 "s" "SIP+D2T" "" _sip._tcp.sip.domain.com.IN NAPTR 100 50 "s...
hi,can anybody send me the document which includes the configuration on meeting place server and call manger server and prequesities for the meeting place .pls suggestregardsGaurav
what is difference b/w unified mobility and device mobility and how both are integrated with Call manger
HI alli need assistance for selecting correct auto attendant console edition (business edition or deparment edition i have 320 phones and need two operator consoles ) . How do i order no of console required . ?Regards
Hi all,if i plug cisco ip phone with switch and assign the voice vlan to it.also i config the voice vlan for it and assign it asip dhcp pool Vlan10 import all network 192.168.10.0 255.255.255.0 default-router 192.168.10.3 dns-server 64.59.135...
Is it possible to state categorically how many users a cluster with a MCS-7835I3-K9-IPC1 publisher and single MCS-7835I3-K9-IPC1 subscriber can support on CUCM 8.x?Regards
HiI have a very basic doubt, many people use the terms IPT and VOIP ( voice over IP) interchangeably, is the both term means the same or there are some differences?Ankush
with David Whiteford Welcome to the Cisco Networking Professionals Ask the Expert conversation. This is an opportunity to get an update on configuration and troubleshooting Session Initiation Protocol (SIP) trunks with Cisco expert David Whiteford. D...
Hi Everyone,Recently built a CUCM 7.1.x box using a DMA export from our 4.2(3). I've noticed that in Phone Configuration, the Phone Button Template selection was not retained for all of our 7965s and 61s. I cannot apply the correct one as the dropdow...
Hey all,I'm trying to call TAC about an issue, but I can't find the serial number of the CUCM. Usually on version 7.x, I go to OS Administration page >> Show >> Hardware and there it is. But it doesn't do this in version 6.x. I also tried show hardwa...
Hello All, Does anyone know if there is a way to turn off the display on the 7921 when it is placed in the base. I have acustomer who has the phones throughout her home, including next to her bed. She would like to turn off the display without ...
Hi,I would like to know if its possible folowing scenario:I have two sites interconnected. In Main site i have one CUCM 7.1 and one 2821 gateway and in remote site i have CUCME 8.1. in a 2951 gateway. My question is that if in this remote site that ...
