IP Telephony and Phones

Resolved! CallManager 7.1.3.32900-4 and "Early Media" problem

Hello.We have this scenario:IPPhone-(SCCP)-CallManager-(SIP)-PGW-(MGCP)-AS53XX-[PRI]-PSTNWhen we make an outgoing call, for example, to a mobile phone that is turned off, we can't hear the "Early Media" message which informs that the call will be for...

Resolved! Uninstall User locale in UCM 8.0

Hello,I know this was not possible in UCM 6.x. Is their option to uninstall the locale on a UCM 8.x?Just deleting the files & directory doesn't work.

Cisco unified mobility advantage

I configure Cuma and I'm stucking in the step Active DirectoryWhen configure Exchange LookupThere are some value that I don't understandThey are :- Contact Adapter- DNS Host Name- Contact Adapter DN Mask- Contact Adapter Search BaseMy Active Director...

Resolved! voip call connected and other side ring out

I have CallManager connected to a gateway at one site. On the other site I have CME. When I do a call from an IP Phone on the CM to an IP Phone on CME, the call rings out at the other side. But when it answers and the phone displaye connected. The IP...

Resolved! End user has requested that MWI flash when a message is received

Good Day All,I have an end user who has requested that the MWI indicator flash when a message has been left on the phone.The phones are deployed in an aged care facility.The Cisco Call Manager cluster is running version 4.2 and Unity Connection 6.1.I...

Gatekeeper Endpoints and Call Routing

If a GK have a bunch of end h323 terminals registered to it and you don't want the call to directly call each other for the purpose rating/accounting purpose that the call needs to signal a billing platform, how can I force GK when Site1 dial Site 2 ...

cisco IP phone 7912 problem...

Hi all, I am using cisco phones in my office. The 7912 phone is not working.. Both the red and the green leds are lit,but with no display. When I connected the phone to netwrok with one jack to PC and the other to network, my PCs netwrk goes down...

Problem bearer capability not authorized on forwarding to/from PSTN

Hi, We're having problems when users forward calls to the PSTN and the originating caller is also from outside our network (PSTN). For example:caller 1 (PSTN cell phone) calls into internalcaller (Joe)Joe's phone set cfwdall to his home numberanyone...

question about inbound call flow

I have some basic questions about CUCM call flow with a SIP CUBE router, if anyone has a moment, please correct anything that is wrong.Here is my understanding of the flow:1. The called number matches an inbound dial-peer and applies the associated t...

Resolved! Can you tell if a DN does not have an external phone number mask

HI,Is there anyway to run a report or look at which DN's do not have an external mask configured?Thanks,Randall

proxy server information in CUCM 6.x !!!

Hi all,i have configured some free XML services for one of my customer on CUCM 6.0 which are available free on internet. customer has protected the internet access via proxy. If the ip phone has to go on internet it will be pass through proxy,Now ho...

Upgrade from 7.1.5 to 8

Hi, I've finally received my licence for 8 and we're currently running on 7.1.5 which doesn't appear to support direct upgrades. Short of rolling back to 7.1.2 and losing any changes made in the last 3 months, does anyone have any ideas of an upg...

Global Translation using SOURCE IP of incoming calls

My goal is to translate (strip off 3 digits) all calls coming FROM a SPECIFIC GATEWAY (in this example, rtr 1720) leaving 7 digits. I have the following on the 3945 RTR:voice source-group V1access-list 50translation-profile incoming verso-in!voice t...

CUBAC8.0.0.535 - Phone BLF & Presence icon

Hi,CUCM users have two deivces that Physical IP Phone and CUPC softphone (UPCXXXXX) which are share the extension.in CUBAC client attendant console screen, I added two icons in [F3-Internal directory] screen that Presence and Phone status but the Pho...

Resolved! Cisco UC on HP Switches

Does any one have qos and switch configs related to HP Switches running Cisco UC ?specifically models such asa. HP Procurve 5406zlb. HP Procurve 3500yl

IP Telephony and Phones

Forum Posts

Resolved! CallManager 7.1.3.32900-4 and "Early Media" problem

Resolved! Uninstall User locale in UCM 8.0

Cisco unified mobility advantage

Resolved! voip call connected and other side ring out

Resolved! End user has requested that MWI flash when a message is received

Gatekeeper Endpoints and Call Routing

cisco IP phone 7912 problem...

Problem bearer capability not authorized on forwarding to/from PSTN

question about inbound call flow

Resolved! Can you tell if a DN does not have an external phone number mask

proxy server information in CUCM 6.x !!!

Upgrade from 7.1.5 to 8

Global Translation using SOURCE IP of incoming calls

CUBAC8.0.0.535 - Phone BLF & Presence icon

Resolved! Cisco UC on HP Switches

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

ATA 191 CPC Settings Missing

Cisco 8851 - Transfering call to another Cisco 8851 - No ringtone

What newer model of Cisco Phones support Single Button Barge feature?

ATA 192 acknowledging with different ptime size

LSC Expiry Notification and oAuth mode

corlist configuration for outgoing calls to restrict international cal

Cisco IP phone unable to dial (787) area code number. CUCM 12.0.1 ver.

phones stopped working on ISR4331-V/K9

Convert Cisco 8841 from Enterprise to MPP as private User

Cisco VOIP 8945 Error 403: Directory Listing Denied Directory listing