Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have 1 ISDN mainline number in Unity (Call routing-Direct call) to a hunt pilot in CUCM and I try to copy same setting for another DDI but failed. The call directly went to CUCM hunt pilot and passed the Unity Greetings. So i wonder which part did ...
Hello We have a few 9971/8945 IP phones and the issues, when they are in a conference call, and they get a second call, they can't add that second call to the conference. Thanks.
Hi everybodyRouter_A(config)#dial-peer voice 10 potsRouter_A(config-dial-peer)#destination-pattern 555...Router_A(config-dial-peer)Let say we dial 555 123. it will match the destination pattern 555 ...How about if I dial 555 12346, will it match the...
Hi, If voice mail is sent as an attachment to email , if it played by the user , mwi can be turned off ? Thanks
Hello, everyone.The datasheet is slightly misleading, because it doesn't mention FXO ports.However, the comparison web page tells that there are FXO ports.ATA 191ATA 192ATA ComparisonDoes anyone really installed this small boxes ?Is there any FXO por...
Dear All , I hope that you doing well . My customer have a CUCM cluster " PUB, 1 Sub " Version 8.6.2.20000-2 on hardware model " R210-212160sw " , we have a new Cisco Business Edition 6000 servers and we need to migrate and upgrade the cluster to 1...
Hi i am waseem Cisco Ip phone 7945 is not registering ipaddress, TFTP DHCP and communication from CUCM to ip phone is good every thing is fine. But still phone displays show "Registering". I have doubt ! if i delete ITL file from IP phone it will wor...
Hi Do we require sip trunk to unity server What is the benefit of having sip trunk rather sccp based installation Thanks
All menu settings completely locked, **# does not help. Help!
Hi, we have one installation with Cisco 4331 router configured as H323 gateway at CUCM. The problem is that callers from outside don`t hear MoH when they are hold or transfered. They hear nothing while hold or tranfser. MoH internal is working. T...
Hi all, We are configuring a new SIP Trunk to our new 2900 router that will be conneting to a our SIP Provider. Topology looks like: CUCM---SIP TRUNK - CUBE - SIP TRUNK - SIP PROVIDER Currentely we are stuck trying to get the CUCM trunk up. We fol...
Hi all, We are configuring a new SIP Trunk to our new 2900 router that will be conneting to a our SIP Provider. Topology looks like: CUCM---SIP TRUNK - CUBE - SIP TRUNK - SIP PROVIDER Currentely we are stuck trying to get the CUCM trunk up. We fol...
I enabled cable-detect on one port of a VG204XM and cable-detect poll-timer 1 under Voice Service Pots. The alerts for connecting and disconnecting a phone are getting logged, but I would like to know how I can configure the VG to send SNMP alerts. ...
Hello!Everything worked fine for me, until I made a mistake in the dial plan: Instead of | 2_9 | I wrote ||2_9|, then I clicked on save. Cisco hanging. When I pick up the phone - the red diode does not light, when the button is clicked, the IVR d...
Hello!I made a hard reset of my Cisco 7965, but after that it can not download the software from the tftp server. The phone twice asks for the term65.default.load and receive it, but only downloads 654kb and does not respond anymore.I read on this fo...
