Is it possible to automatically import AD contacts in to the UCM directory (And not just users?) Version is 9.1.2. Customer has Samaccountname for the user ID, but AD contacts don’t have a Samaccountname Anyone done this before?
All,When connect through Jabber Mobile via Expressway, we are unable to perform screen sharing and also cannot share any print screens in the chat. (The Share Screen button is grayed out)This works fine when we connect to Jabber internally.Any ideas ...
Hi, I have CUCM cluster, standalone PLM and PCD (10.5). I have changed NTP in CUCM Cluster and PLM and they don't need to re-host. In PCD, I successfully add new NTP but when I try to delete primary NTP, the warning that "changes will invalidate the...
Dear members, I am trying to configure the Cisco UC540 on my lab, I have connected the device to my L3 switch on vlan 10 (default vlan of the UC540) but unfortunately I can not ping the device from inside or access it via CCA from inside. It is now 2...
Hi there,I have a customer that want to migrate thier video estate from VCS 8.5 to CUCM 10.5. This will happen over some time as they slowly replace legacy endpoints that are only supported on VCS. They currently have conductor cluster controlling ...
Hello, How i could assign holidays to a call-handler in Unity 10?, i can see were configure work hours but not holidays. thanks Anna
We are running Cisco Unified Communications Manager 8.6.2.22900-9 and having issues using the CCMUser GUI with Internet Explorer 11. We have set the compatabilty view setting, no change. The CCMAdmin page works fine. We are able to log into the CCMUs...
Old CER (7.1) & CUCM (6.1.5) cluster. This solution is intended to deliver a recorded message to callers making 911 calls from IP Communicators ('you cannot make a 911 call from this device') - which is controlled by defining the IP Subnet and assoc...
Hello, this should seem fairly easy but so far it has not been. I just purchased a few 8811 phones, without realizing that I need the 10.5.2 version of Call Manager. I have 10.5.1 currently. Is it easy/free to go to the .2 version? If so, how? Thank ...
Hello,I need Setup file Call Manager Attendant Console for window 7, 64 bit which compatible for CUCM (6.1.2)Could anyone please provide me the link?Thanks Puneet Singh
How do I add a custom alert in RTMT? I've done this before but can't remember how. Cisco documentation says you can do it but doesn't show how.
We currently have CUC 10.5.2 installed on a 1K user OVA and we have single inbox enabled. I wanted to know what are the ramifications of using an OVA that's not the correct size because we have 1100 users instead of 1000 and they all have single inbo...
Hi Team,When you press the VM messages button just rings 320 not going to VM. We did the conversation manager restart and voice mail port resets. it worked.But this issue is occuring everyday.any fixup ? ThanksDeva
Hi,i have a problem with my company call manager, we start to notice delay in call processing, we found that call manager CPU are 100% utilized, and i can not figure out why this is happening, we are in the middle of renew the support for the call ma...
Hello, I have a BE6000s and I'm trying to install IM&P version 10.5.2, but after more that an hour after I initiate, I got a critical error and system is halted. The critical error message is like this: The installation has encountered a unrecoverab...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 02-24-2026 08:53 AM | ||
| 02-14-2026 10:42 AM | ||
| 02-11-2026 09:32 AM | ||
| 02-05-2026 02:22 PM | ||
| 12-30-2025 12:37 PM |
