Hi dear experts. Please help to solve problem. We have exchange server and call centre system in department of technical support. Number of technical support is 555.(Hunt list, hunt pilot) And we configure them to forward unanswered call to voicemail...
Hi all, I'm trying to set up a lab just for testing and playing around and I need some help from you people. In one end I have a CME configured with SCCP phones. In the other end I want to configure a CME as the SIP service provider. That means tha...
Dear All, We have 1500 IP phones, and my client wants hardware inventory (serial number & mac-address) of all the phones, concern is phones are not in one location. Is there a way in CUCM? Thanks in advance
I have CP 8831 and Cisco 2921 with IOS version 15.0 and CME version 10.5. I have tried the firmware version 9 and 10 for the CP 8831 but none is registering. The phone doesn't go beyond the Cisco logo. I have tried to follow the link but still not ...
Hey guys! Wondering if you could help me out... I have a SIP trunk that is used exclusively for outbound calling. I am running into an issue where if a number is dialed that is "out of service" the phone will return a busy tone. This causes confus...
Hi, Conference call is working fine but we add any pstn user in call, only pstn user call disconnects after 23 mins. Any idea how to resolve the issue. help required. Regards, HK
Hi everyone.I have a problem where inbound calls reach a SIP trunk in a voice gateway 2811 and then forwarded to CUCM via dial-peer. Everything is OK when is answered in an IP phone but when trying to transfer to anorther extension there are problems...
Hi while installing Presence server subscriber, I'm getting an error during the installation, all details (server name, IP address and security password) are 100% correct. I was figure out on the publisher that version mismatch detected while version...
Hi Team, CUCM : 9.x Gateway : 2921- H323 having BRI connection Inbound call not working Issue: When some call the Number 62578294 , the call hits the gateway .... but it does not ring the phone. We are getting cause value 27. I have attached the l...
Dear Expert, Please See the attached Image that shows the error messages of my Cisco UCM. Please help me with the reason of Error and How can solve this. Besides I have realized that It is a issue with License So I am going to buy license with below ...
Hello, How do we enabled/disabled "Admin Settings" on the 8851 IP phone's Applications with CCM 10? Thanks,
Hello dears, Can we use CME as a auto attendant without CUE.? If it's possible so what I need to configure this.
Hello I have a cisco ip phone 8845 sip registred with cisco unified communication manager v11 . And i want to configure and show list of abriger number in this device phone . Can you help me please Thank you
Hi All, We cannot make a outgoing call using the FXO ports of the Voice Gateway and we are getting a busy tone. Already checked the FXO lines and directly connected them to an analog phones and lines are confirmed working. Voice Gateway is currently...
Hi all, We have a very weird scenario where our service desk hunt group rings all of our phones at once but when one user is on a phone whilst the phones are ringing but then finishes the call, their phone will not ring as a part of the hunt group. T...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 07-19-2025 08:15 AM | ||
| 07-16-2025 12:00 PM | ||
| 07-15-2025 06:51 AM | ||
| 07-09-2025 09:52 AM | ||
| 07-08-2025 12:50 PM |
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
