IP Telephony and Phones

HiOne of my client uses CUCM V5.1.3 and now needs SRST to be deployed for them. Are there any limitations related to compatibility between CUCM v5.1.3 and SRST ver 9.x.Appreciate the replies.Thanks Ibrahim Sayeed

Hi,In its-CISCO.2.0.3.0.tcl script I made the following changes:proc init { } {    global param1    global selectCnt    global callInfo    global legConnected    global maxExtensionLen    set param1(interruptPrompt) true    set param1(abortKey) *    ...

Hi guys;I have CME 9.1 and ip phone sip 3905, i need to register this phone but I cant find where is the issue ,the configuration file and debugs attached

Hi,I get the following error message as I try to install a cucm subscriber "The installation has encountered a unrecoverable internal error. For further assistance report the following information to your support provider.Read error on file /mnt/sour...

Is there a way to get a list of all users with Mailbox Custom Settins in Unity Connection Version 8.6?

           Dear all,we have a PRI range 22 3369 55XX-57XX and i have assigned one Extension to device but when i make call always My PRI pilot number is showing on other end apart from my Extension. when i make call from cisco phone then calls hit on...

Hi everyone, I'm building a cluster running CM v8.5.1.12900-7 with 3 subs and 1 pub.  Two of the subs have been built and have no issues joining the cluster.  The third sub, which is actually the primary sub, is unable to join the cluster.  I've conf...

My boss has come to me and wants better voice quality when making calls within our group. He indicated that we should sound like we are in the same room when calling each other.For a little more info - We have 10 phones up that are on the same switch...

Hi,I currently am running version Cisco Call manager version 7 on 8 MCS servers.1 Pub3 Subs 2 CCX2 Unity - Version 8Can anyone tell me if I can split the redundant servers with another location on my WAN?I would like to split them as follows:location...

Hi All:When I configure CME as SRST I get a constant scrolling error: returning empty string !!!!  I cannot find one instance of this error anywhere on the internet. Has anyone ever seen the aforementioned error. Please see the SRST configuration and...

Dear Networkers,We have a CUCM 8.5(1) cluster (1 PUB + 2 Subscribers). We're using CIPCs only (Internal DNs 1XXX). we have an AS5350-XM [ IOS 15.1(1)T2 ] Voice Gateway with isdn links to the PSTN. We're using a very basic configuration.we have the fo...

Hi everyone, I have an issue where the configured programmable buttons have a line going through the image and gray over the color as well. If I unconfigure the buttons the image is normal.  Any suggestions on where to change this so my line buttons ...

We are working on upgrading our UC infrastructure to 9.X on UCS.  We currenlty have legacy MCS appliances and are running 7.1(3)b for cccm and 7.1(2) for connection.  Everything I have read about upgrading connection specifically states version 7.1(3...

I am tasked with testing a bunch of FXO cards (VIC-2FXO) and I have a 1760 router with an FXS card in it.  I configured the router so that when I call from an IP phone (ext 4000) to the FXS card port 1/0 (ext 4015) it calls the FXO card on port 0/0 w...