IP Telephony and Phones

Here's one.  I had AAR working and now it's not.  I cannot figure out what changes have been made that could have done it.  But what's happening now is when I test it by setting the location bandwidth to 1 calls from one site to another go through as...

Hello everyone.We are having an issue with a Cisco 7961 (I know, we are a little behind the times regarding technology).  It appears that the Voice Mail Envelope Icon is not clearing when the Voice Mail's are checked. This phone has multiple lines go...

Hi everyone, how can we export the hunt groups configured on the COmmunication Manager version 8.6?We have been told to export the data, the report needs to run out of hours.   Would this be correct?Also, how can we retrieve or export the list of DDI...

Hi,"How to route the call  directly to voice mail for a particular phone  once the Hunt list finish its process and the voice mail should be played to the particular phone where the hunt list stop,so the configured voice mail for that phone automatic...

Hi, We have had a problem where an outbound call from our call manager via a H323 VGW ended but the B channel remained active and call charges were run up. The call remained active for days. Can anyone advise please - is there a command I can use on ...

Hi All,'Please find the below debug output for voice application in VG224 device.++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++01HW239102#debug voice application stcapp port 2/15stcapp port debugging is on for 2/1501...

HelloRecently i brought our cucm cluster behind two fwsm firewall, everything is correct and all ip phones (SCCP, SIP) are registered and working properly,for testing purpose i failoverd the main firewall to see the behaviour of all network services ...

Hi All,Is it possible to register an IP phone with 2 different servers at the same time ??MeansLine 1- Ext 1000 ---------------------- To Server 1Line 2- Ext 2000 ---------------------- To Server 2 /CME Router  RegardsRohit

Hi,new to UCCE. If I understand it correctly:If the WAVE file from CVP/ UCCE is updated, the file should be reloaded on the voicegateway, which is the local cache for WAVE files.If an announcement, e.g. sales message, is changed, that wave file shoul...

I have configured Single number reach to a client (CCM 8.6.2) and everything is working fine without any problem but,And When the call comes to desktop phone then transferred to the user mobile (Remote Destination), the call will be logged at the cal...