Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,We have integrated Unity 7 with Exchange 2007, the issue which i face is that if voicemail left from PSTN is not getting delivered, but internal callers leavevoicemail then the same is available in the users Mailbox.Thanks,Vinay
I have:1. 2821 router running IOS 12.4, CME 4.1.2. PSTN lines coming into my routers FXO cards to cover 3 tenants. Tenants 1 & 2 share staff, Tenant 3 solo.3. All lines go to an Automated Attendant (AA) to check for Office operating hrs then nominal...
Do the new phone firmware files get pushed from the publisher to the subscribers in a cluster - or do I need to upload the new firmware files on every subscribers as well? TFTP is running on one of the subscribers, not on the publisherJeff
We deployed 8.4.2 over the weekend and now a branch office that connects to our core via ASA to ASA VPN tunnel is no longer able to make long distance calls. We are using Callmanager 4.1 and it is connected to our core, the phones at the branch regi...
HI All,Can a voicemal message be removed from unity express and be converted to MP3 or a WAV file and if so how? Thanks in advance for all your help.
For every line I choose that is on my VG224 I get initial static instead of internal dial tone, I can then dial 9 and the number and it works fine.no changes have been made and it was working fine a few days agoI have gone to the 110 block and clippe...
Dears,I have MGCP gateway, it has Vic2-4FXO , one FXO ports has analog line that is connected to Telular, the Incoming calls to an IP phone through this port shows Unknown Number for the Calling ID, I tried to change the related service parameters re...
Hi i have H323 voice Gateway with E1 configuration , by question is how can i call outside directly without press 9 or 0 then + mobile or home or international number ???Ex. 967205444 i need without press 967205444there is steps or notepad configura...
HiWe have noticed that after a reload, the FXO ports on our 2-port card will lose the signaling configuration.For example, they are set to LoopStart but after reload port 0 is set to unknown and 1 is groundStart.Has anyone seen this or perhaps knows ...
Hi,I searced a lot, but couldn't find answer if one should purchase phone licenses in addition to the FL-SRST-25= for a ISR G1 2800 router? We have a costumer that has VGs in place and wants to add SRST capability to his 2800 series VGs + upgrade to ...
Hi Voice Team,I need to change the initial greeting on Cisco Unity Connection 8.5. for example: The caller dial a directory number forwading all calls to cisco unity. The caller hear "Sorry recorded name is not available, please leave a message"... I...
Hi,is it possible to restrict the phone settings at callmanager express for end users like in communications manager, so thatthe users have not access to settings at the phone via the settings button and cannot change ringtones etc.
hi guys,i firstly tried to install the cisco ip phone 7942G model. but while i try to change the LAN configuration its showed unlocke.so i tried to restore the factory settings which is available in cisco guide.after i did the factory settings its go...
Hi all,My customer want to see the number of the phone forwarding.I'll try to explain, one phone have number 1000 and do a call-forwarding to external mobile phone number to 9061234567Call-forward is working, but, If I'm calling from outside or insid...
Hi there,I have devised a BOQ based on CUCM 8.5 with MCS server; and for using 5 CCX user I have added additional MCS server and appliance entitlement for CCX server. Below is the BOQ.Server software:ProductDescriptionQuantityCUCM-USR-LICTop Level Sk...
