Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Has anyone had success activating an E & M card in an HWIC slot on a 2811?Thanks.
Incoming calls from a PRI are not reaching the phone. We are using MGCP.Here is a debug of the ISDN q931 debug:Aug 23 15:36:22 UTC: ISDN Se2/0:15 Q931: RX <- SETUP pd = 8 callref = 0x2933 Sending Complete Bearer Capability i = 0x8090A3...
I need help setting 911 routes we send a mask number to callers so when they call back to that number they can't reach us, however i would like to send real DID to 911 can i do that?Thanks
Hi All, I have a CCME and AIM-CUE , Call flow is PSTN----> CCME FXO-----> IVR(AA on AIM-CUE)----- --->Extention or OperatorCall complete normal if the pattern above is followed.but if a caller calls in and Disconnect the call dur...
Hi to everyone. is it possible to configure CUCM as SIP client/phone to other PBX like siemens? thanks.
helloI have CCM 6.1, I'm trying to change the configuration of the route patterns, but when I made the changes, and go back to the list, the server is not saving the changes. Any help pleaseThanks
Hi Guys,I am following doubt: My Customer have two subinterfaces Fastethernet, when I try configure the parameters:h323-gateway voip interfaceh323-gateway voip bind srcaddr 172.22.38.1appear the message error:interface FastEthernet0/0.1description su...
Dear Support,I have a weird issue while on SRST. I have a PBX integrated with Q-Sig. The calls from the PBX works fine when the CUCM is available but in SRST the called number on the GW appears only first 5 digits where as the PBX sends 7 digits to t...
Dear Cisco users,I want to know of the next question is possible in cucm and certainly in version 4.2.Is it possible to schedule forwarding call for certain weeks?I will give an example:User A can be called on his DN in work hours, but in the weeken...
I'm currently having some issues with adding a background image for a 7965 VOIP Phone in Call Manager 4.3, and I was wondering if it is even possible to have them in such an out-dated version of Call Manager? If anybody could give me step-by-step ins...
Hi,We have a Cisco UCS C210 rack mount server that we will install CUCM 8.5 and CUC 8.5 as virtual machines.We have an exisiting CUCM server running version 6.1 that will later be removed from the network.I want to migrate the data from CUCM 6.1 and ...
I think this should be a straight forward question? Does Cisco support managing ESXi hosts in VCenter?
Hi all,i have a hybrid environment that contains CUCM 7.1.5 integrated with Alcatel through a H323 3945 cisco Gateway.all calls work fine between the two system, however when an alcatel phone try to dial ##33........... number (which is supposed to ...
HelloWe are closing a small office that is currently part of our CUCM/VoIP infrastructure. The support team will work from home and each will order a 2nd line from their telco provider. What options do I have if the 800# terminates on our CUCM syst...
Having an issue right now with caller-id coming across the main display when a 7916 expansion module is attached. Currently we have a secretaries phone that is configured with a 7916 expansion module. The 7916 has multiple shared line appearances t...
