Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi team, I was working for some hours to troubleshoot incoming calls not working and outgoing calls PSTN (one side can't hear a thing) Sympton is: Call from external numbel > extension attends > external keeps calling > call dropped I've checked cc...
Hi Guys, I have Cisco ISR 4321 manage voip in my company. the issue is : When I want to call another IP phone in the building of my company(internal), the ring is ok, but when I want to call a local number or a mobile, it takes 50 seconds to have the...
Hi everyone,I am trying to expand my existing VoIP network that uses a CUCM 11.5 to another location using a newly bought CISCO isr4331/k9 but I've never configured an isr4331/k9 and don't know how to proper make use of it.I need to install 80 Cisco...
Hello folk! CUCM 14SU3 Compatibility with Expressway x8.11.3 ?IMP 14SU3 Compatibility with Expressway x8.11.3 ?CUCM 14SU3 Compatibility with CCX 11.6(2) ES08-13 ?IMP 14SU3 Compatibility with CCX 11.6(2) ES08-13 ?Cisco Expressway X14.3 Compatibility w...
Hi Team I reused an extension for another user. However when I call the new user, the display name is still showing as the old name. I updated the description, alerting name, ASCII alerting name, Display (Caller ID), ASCII Display (Caller ID) and...
Hi We are implementing Avaya IPO R10 part of the end points are cisco 7821 SIP Phone. Kindly help us how to register this to avaya IPO
hi,i received some used cisco 8851 phones from a now defunct company. i'd like to convert the phones from enterprise firmware to mpp firmware (for use with asterisk / freepbx).i have learned that i need to purchase a license for each device to be abl...
Is there a place within the WebEx Control Hub to change how transferred calls are handled? Right now, our receptionist will transfer an external call to someone inside the company, and instead of it showing the person's caller ID, it shows the recep...
Good day,Is there a possibility to increase the result in Local Directory more than 30 results?THANKS
Are there any good tutorials on how to match to "user" when matching dial peers to URI's?I can get my dial peers on a Cisco CUBE to work correctly when numeric only (E164). But, when I replace with URI matching, it messes everything up. Anything I fi...
Hi,I am facing issue with PRI failover,This is first time I am configuring combination of PRI and SIP Gateway for CUCM I have two VG for redundancy purposeBoth are connected to CUCM with respective SIP TrunkInbound and Outbound Calling working fine f...
...and we don't have any indication that they're unreachable until calls from the elevator indicate that they're not reachable. These vgXXX ports are registered to ucm and all indications are that things should work. Until they don't.Anyone want to...
I'm building a cucm deployment that is a takeout of an old Avaya analog PBX and we're trying to replicate some of the old analog "features". The current system has sidetone on the handset and the end user is asking if it's possible to do with the new...
Looking to preform a bulk inport of 58 CTI_port phone device types and my process was an export of the same all detailspopulated the sheet with the list of lines that needs to be forwarded, I saved file as CSV UTF-8 (comma delimited)I also change the...
I have been registered into a hunt group but still cannot pick up calls from my hunt group. I however get a "There is call available for pick up." notification on my screen but is not allowed to pick up and listen to the call. Anyone encountered simi...
