Unified Communications Infrastructure

Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! CUCM with two Gateway

Helloi have cucm 12 and gateway1 with interface 20line , E1 and another gateway2 with interface 20lines but not connected on E1, i will connect it to lan .the two gateway are inserted in Cucm, i will have lines FXO in the segond gateway2.wich config ...

kingstdz by Beginner
  • 6 replies
  • 0 Helpful votes

Changing the AS Bandwidth allocation for outgoing call invites in SDP

We have a ITSP trying to implement VoLTE on their mobile network and are coming up with some voice quality issues calling in to Cisco CUCM 12.0 via an Audiocodes SBC. We are using standard G711 codecs on the SIP trunk to the SBC and the SDP offer has...

CUCM Wireless phones (7826, 8821) - non-SMS text messages - Healthcare

I am looking for a way to get text messages sent to Cisco wireless phones (7926, 8821) from an internal device via SIP or CTI. CUCM version is 12.5. The sending application would be Rauland-Borg Responder V5. Their proposed solution involves a serial...

CUBE License

Hi Experts, In what instance will I use CUBE license? and is it counted per concurrent session? Do I need it for the following?1. CUCM <-> SIP <-> CUBE/VG (ISR/CSR/ASR) <-> ISDN2. CUCM <-> H323 <-> CUBE/VG (ISR/CSR/ASR) <-> ISDN3. CUCM <-> H323 <-> C...