Data Center and Cloud Knowledge Base

connect db2 mf with teo/cpo

CPO 2.2 - HF13

my tasks

Hello Friends, I have one urgent requirement from my client, to write a TCL script for monitoring one of our LDAP server. As i understood from other posts, default script will send only a anonymous bind request which is getting failed in my case, so ...

IntroductionInsert or Modify HTTP HeaderInsert Source IP to an existing XFF listVerifyRelated Information  IntroductionIn Cisco ACE configuration Real servers are dedicated physical servers that you typically configure in groups called server farms. ...

SQL 2008 R2 has been tested as a TA Database and works fine. It is supported.

Team,I would like to use some of the existing Dell Servers for new network design of Nexus 7000 + Nexus 2000 extenders. What are my options for FEC to the hosts? All references of M81KR I found on CCO are related to UCS product only.What's best optio...

IntroductionFTP is a peer to peer kind of protocol in which Client establish direct connection with Server to communicate commands and data transfer between them. The overall process of communication is achieved by establishing two connections betwee...

Script InputsVMName -------------------------------- $args[0]ISO_Path ------------------------------- $args[1] Vcenter ServerName --------------- $args[2]VcenterUserName ------------------ $args[3]  VcenterPassword ------------------- $args[4] PowerC...

 IntroductionThe WAAS system consists of a set of devices called wide area application engines (WAEs) that work together to optimize TCP traffic over your network. When client and server applications attempt to communicate with each other, the networ...

IntroductionCisco WAAS 4.2 adds support for high-availability clustering with inline deployment. This feature enables flexible and redundant deployment for both data center and branch offices. In a serial inline cluster, two Cisco WAAS devices are co...

I have 8 websphere applications in two machines,my ACE is one-arm-mode 。the data stream is like that,http request:client-->ace virtual ip+vritual port(snat)-->real ip+real port(websphere applications).  then,http response:websphere applications(with ...

IntroductionNew Features in UCS 2.0 Miscellaneous Related Information   Introduction   Jose Martinez is an escalation engineer for server virtualization products in the RTP Technical Assistance Center. Jose joined Cisco in 1995 and has worked in m...

This live event covered the new features supported on Cisco Unified Computing System (Cisco UCS) Generation 2 hardware with Cisco experts Jose Martinez and Matthew Wronkowski. Topics included the Cisco UCS 6200 Series Fabric Interconnect, Cisco UCS...

TEO Reporting DB upgrade fails