Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi Everyone, can anyone advise a way around an issue I have. I cannot call Hunt Pilots with phones that are withholding their CLI. There doesn't appear to be an option within the Hunt Pilot configuration to accept/reject "Anonymous Calls" as there i...
Hello, we have a quick question: is it possible to install a CUCM Publisher and a CUCM Subscriber on the same BE6000S server? TIA and regards.
Hi All I have a CUCM version 10.5 ,i have BLF SD`s created on a 8851 with Expansion modules. Out of the 18 BLF SD`s i have created on here there are 3 that just doesn`t seem to want to work. The 3 extensions in question are in the exact same partitio...
Hello Experts, We have one central site and several remote sites. At central Data Centre site has a Subscriber and a SIP2 voice router. Our CUCM Publisher and SIP1 voice router are at Civic centre remote site. Both Data Centre and Civic remote site...
Hi, We just installed a CUCM 11.5. I have a user who wants 3 physical line buttons on his desk phone to be First button - His main number extension 10005Second button - ext 10006Third button - ext 10007 He wants it set up when he's on the phone on hi...
We are currently running CallManager 11.0 and having issues with RTMT. So, we want to stop and restart it. What do we need to do here? Are ther certain services that we need to stop and restart?
Dears all i have an issue with registering cisco 7821 phones on CME 10.5 (IOS c2900-universalk9-mz.SPA.154-3.M5) and the phones have software (sip78xx.10-3-1-12) the phone keeps in registering status and dont register at all and when trying to pres...
Just hoping for a sanity check to see if I'm missing something... Looking for a way to do a BAT import into Unity Connection of users from Communications Manager. thanks, will
Hello: I am trying to connect a ISDN Phone to a bri port in a VIC2-2BRI-NT/TE, but the calls doesn´t work in both direcctions. The VIC is installed in a MGCP GW. Here is the configuration that I am using: interface BRI0/2/0 no ip address isdn swit...
I have an end user with Anyconnect. The softphone is not using the VPN IP to communicate out. Has anyone seen this issue? Isnt the softphone supposed to register with the VPN IP address?
Hi, I have created the Remote Destination Profile Template and added line template. I have just added provided line template name, partition, EPNM and partition in Add A New DN. However, when i run the BAT it updates the existing DN i.e. makes descr...
i have : 2xcucm version "10.5.1.10000-7" 2xIMP version " 10.5.1.10000-9" 2xcuc version "10.5.1.10000-7" vcs-control X8.6.1 vcs-expressway X8.6.1 i have created a jabber user for android app , made the device name "BOT+"user id in capital letter" and...
Cisco Call Manager 9 When we receive phone calls from an External source, they only display as External on the internal phones (7940/7911s). Some have a slightly different ringtone which I am not sure why. I have only just taken over this system but ...
Hi, I'm pretty new to Cisco telephony and need a little help understanding something I'm seeing. Can anyone explain why I am seeing a lot of calls ending in calldisposition 52 in the first call leg? I know that 52 is 'called party disconnected, and...
Hi, I'm pretty new to Cisco telephony and need a little help understanding something I'm seeing. Can anyone explain why I am seeing a lot of calls ending in calldisposition 52 in the first call leg? I know that 52 is 'called party disconnected, and...
