Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Issue with ATA190 and Postage Machine Neopost IJ35/50 We deployed on our company the ToIP system, we need keep some old analog phone, so we deployed some ATA 190. Our problem is the following: We have a Postage Machine "Neopost IJ35/50" connected...
PRI connected to CME CME configured as H.323 gateway in CUCM CME configured with VOIP dial peer point to CUCM
Hello, We need to know the pin-out of the headset port of a Cisco IP Phone 7940 ?Much appreciated.Dirk
Hello! We have a CUCM 10.5 Cluster consisting of PUB and 3 SUBS. PUB and SUB 1 are at site A, SUB 2 at site B, SUB 3 at site C. We have a CM Group (CMG3) with SUB 3, SUB 1, SUB 2 - in that order. The Device Pool that is assigned to all the devi...
Hello All, first time poster. My customer recently migrated from a CUE 7.0 to a hosted solution and had their DIDs ported as well. A few of these recently ported DIDs cannot be called from another company location that still has another CUE 7.0, al...
CUCM is 10.5, CUBE is 2900 running c2900-universalk9-mz.SPA.153-3.M4.bin". SIP call is coming into CUBE. Negotiates to 711G. CUBE passes call to CUCM which in turn sends to a UCCX which will then send call to a SCCP phone across a IP MPLS back bon...
So a Customer Just blew my small mind. Our Site consists mainly of 7841 devices running sip78xx.11-7-1-17, all calls come into and leave our site over ISR4k's to PSTN I did NOT know that if a call is made internally, it is a different ringtone tha...
Hi All, I'm trying to register a Polycom SoundStation IP 6000 with a CME and I'm getting the following in the SIP debug: Sent:SIP/2.0 100 TryingVia: SIP/2.0/UDP 172.20.58.73;branch=z9hG4bK4660f4bcDCE42CB5From: "SoundStation IP" <sip:SSIP@172.20.58....
Hi All, We are facing issue while making outbound calls as we are hearing ring back tone( 1-2 rings) before actual PSTN phone rings and also if PSTN Phone is switched off it initially gives ringback than we get switch off message. We are using SIP ...
Hello all, Just thinking of a DR scenarion in terms of voice calls via our voice gateways.We have 2 sites - one being the main site with more channel capacity & the other with lesser capacity on our voice gateway routers/isdn. what way to check if th...
Hello, My client has CUCM System version: 7.1.5.31900-3. He have to change IP address of CUCM. He use IP address as hostname. Should he have to rehost license file after reip?
Hi All, My company is looking for a way to pre-populate the username on the windows client for our users. Is there a key, file or any other method that we could use to pre-populate the username so it is stored or entered for the user when the first...
Hi, For a specific dialed / outgoing number call drops after 4 rings. I found this "500 Internal Server" error as i collect logs from Call manager. SIP/2.0 500 Internal Server ErrorVia: SIP/2.0/TCP 172.16.8.16:5060;branch=z9hG4bK191c876ad3b6bFrom...
I have a strange request and I am wondering if anyone has ever solved this question. I am 3 zone paging set up ATA to TAMB2 to ZPM-3. This site was recently and Avaya site and the paging was Paging Port to ZPM-3 and the Avaya paging port had the abi...
Hi I have several CP3905 using Sip Firmware working fine but i'd like to access then from SSH. I did some conf like img bellow but i cant access ! What is wrong ? what is missing ? Thanks
