Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
My phone got stuck on Configuring Cm List, What next to do?
Ok, so I setup a Cisco SSL IP Phone VPN to an ASA5550. It works great, except for in 90% of my users houses, they have a DHCP server that is giving them "next server ip address" with the address of their Default gateway. The Cisco Phones are interpre...
Hi there, Can anyone shed light on the encl logs which are generated whenever I insert NME-CUE module into Cisco 2811 Router? Please note that the module was working perfectly earlier. Any help in this regard will be highly appreciated.
Issue: Call drops and calls cutting in and out using Cisco IP Phone 7841 and Cisco Wireless 7925G Descriptions: Client reported that since November 2016, they are experiencing call drops in the middle of conversation and/or sometimes they are unabl...
Hello all , I have configured and FXO ports on a 2901 gateway as an MGCP and everything is going fine except the caller ID giving me as "Call from Unknown Number" so I check the configuration page of FXO and enable caller ID but now it gives me as "...
I have a number of 8851 phones registered to CallManager 11.0.1. I'm trying to control of the ringtone and the ability for users to set the ringtone from the administration console. I've read about the "Admin Configurable Ringer" parameter, which is...
Riddle me this, I've been troubleshooting a voice quality issue with a client recently and I'm curious to get some feedback from the community. I've narrowed it down to packet loss between both the 2901 voice gateway (FXO for PSTN) and the phones (b...
Dears, Our unified messaging 9.1 was working fine with exchange 2003, we upgraded to exchange 2016 and now the Unified messaging has stopped working, I want to collect logs , so which traces I have to collect from rtmt.any body can guide me please. ...
Does anyone have shareable examples? I have a CUBE behind a VMwareEdge firewall, performing NAT towards the ITSP. When I receive an "OPTIONS" from the ITSP, the external ip-address is presented to my CUBE, and teh request is rejcted as shown below. ...
Hello everyone, Happy new Year, Want to seek for help here, already stuck and run out of idea, recently i do changed the en_welcome.au file with the new audio, i am using the same name as the previous. Previously this work well without any issue for ...
Hello is it possible to filter users sitting in one organization unit? We got the following hierarchy: OU=Users,DC=corporate,DC=com OU=BU1,OU=Users,DC=corporate,DC=com OU=BU2,OU=Users,DC=corporate,DC=com OU=BU3,OU=Users,DC=corporate,DC=com OU=BU3,OU...
Hi, I am having 15 phones in a branch these 15 phone are in some different pick up groups,I want 3 User to pick all these phones. Note: These 3 users are also in some pick up group. How can I make these 3 user to pick up all 15 phones. Thanks in ...
Hi, One of our customer got 7841 series IP Phone and they need to change the background image of the phone. When I checked in the internet t says there is no option to change the background image other than pre-updated image on the phone. I just w...
Good afternoon, Our IT department has a common line at DN 499. I would like to setup some sort of "On call" schedule for after hours. If the call comes in to extension 499 after 5:00PM on Week 1 the call is forwarded to Team member 1 cell phone. If t...
hi guys, I have a mixed mode 9.1 cucm cluster working fine. I will be doing a parallel migration to 10.5.2 sooner but the requirement is to have all encrypted. basically I will take the 9.1 backup and build a lab version , restore, upgrade to 10.5....
