Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi allA quick question: after issuing "auto qos voip cisco-phone" in an interface fa0/5 which is connected to a cisco phone, the DSCP value on Skinny packet from phone has been changed to the default value 0. when I stop the MLS QOS on switch, DSCP v...
I have Call Manager v7.1.3 and a Cisco 2811 router running IOS 124-15. Right now we have moved to eFax as our faxing solution since the copiers we are using just kept cutting off the faxes. To forward the internal number to efax I went onto line one ...
I have 3 7925 wireless phones. I have them connected to my wireless network and they have all auto registered. on two of the phones when I try to select "services" it tells me "URL not configured". On the third phone when I go to services and select ...
Hello all,CallManager 8.5.1Gateways are both MGCP and h323What I'm trying to do is pass correct caller id to specific remote destinations, but the main number to all other off-net calls.So I have a remote destination with the number 915555555555 whic...
guys, i have just found a solution for a device displaying host not found when trying to log into extension mobility. my question is, how much disruption will this cause my network if i was to do it during office hours. what kind of problems should i...
Hi all,i have uploaded ringtone on cme flash as per cisco doc. but still on ip phone i can see 2 default ring tone. is there any other procedure to do so my requirment is that user can get option to select the ringtone from ip phone itself as we c...
Current setup:CCM: CM6.0.1.2004-4CUE: AIM module, 3.01Task completed so far1. AXL web service activated2. CTI RP for VM added3. 6 CTI ports added4. Add a Application User and add them CTI Route-Point and CTI Ports enable rightsProblems:1. CTI route p...
I have some concern regarding MVA feature on the callManager CUCM, is there a license for this feature and what are the max number of users that can use this feature at the same time?ThanksAli
Hi,I thought caller id support was included using MGCP with FXS/FXO but I am still having issues.here is my setupCUCM82621XM with VIC-2FXS and VIC-2FXO-M1 and 12.4-25D IOSusing IP phone as well as analog phone connected to FXS port above.First issue ...
I just completed an upgrade from CUCM/Unity v4 to CUCM/Uconn 8.6Apparently the customer was using a Unity call handler as a meet me attendant. The call handler still exists and attempts to function properly but never completes the transfer.The caller...
Hi,Is it possible to make phone busy when somebody calling you?Like you're rejecting call at your mobile phone.I was not able to find some way fr it...CM 5.1.3.Thanks.
Hi there,I wanted to know if anyone was able to program speed dial for BLF keys or on sidecars on a UC560 System. I have added personal speed dials and system speed dials, but through CCA i am unable to add speed dials through any extensions. There...
I have a system that has 6 tanbugs in it. Is this a viable option for Tanburg replacement, as one of my sites is handled over a VSAT connection
Hi,IP phones registered to CME are assigned 1XX ephon-dn's. There are four 3 digit PSTN numbers that start with 1 (1XX).Users call PSTN with 9 prefix (91XX) and after translation 91XX transformed to 1XX and internal number is called instead of PSTN n...
I'm playing around with the mobility feature of CUCM (I'm on 8.6.2)I can use the *81 & *83 codes to hold and resume a call. But how does the transfer *84 work ? I can't find any docs on how a user uses the mobility feature; Only docs on how a sysadmi...
