Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dears ,CUCM (11.5) ====H323 GW (router 4331with no PVDM ) FXO card with it's own resources ===PSTNwhen we make outbound call for example dial my cell Phone ,it is ringing but after 10s call terminated ,also if i answered the call ,it disconnected ...
I have interesting scenario, on Incoming SIP call If call from field has 2222 @10.X.X.X then i need to send invite to 919191@10.X.X.X Let me know if possible
Hi allI'm trying to configure a SNR on a CME (7.1). Internal incoming calls are working, external incoming call are not.Here the configuration.ephone-dn 26 dual-line number 726 no-reg primary label xxx(726) description xxx name xx mobility snr 5726...
Hi,I was upgrading 2 cisco 7961 ip phone for my home lab using CME 7.1, the upgrade went smoothly for the first one. But the second one displays " upgrading " forever. After 1 or 2 hours nothing changed, so I decided to reset it to 123456789*0# not...
Hi guys, Can someone tell me how to active the headset button by default on the 7841 cisco phone ? A user wants to have it active all the time. Thanks in advance, Alberto
Good evening everyone,I implemented a TOIP network in a small company in which I used the following equipments: Cisco IP Phone CP-3905, a Cisco SF200-24P switch, and a Cisco 2901 (CME version 15.3 ) IPBX . Initially, communication worked well between...
Hi, We have loaded the cmterm-8821.11-0-3-6.cop.sgn file onto all cucm servers and restarted the TFTP services but still cannot add nor register a cisco 8821 wireless phone on the system, any ideas what we can do?
Dear Community, as of other community discussions you can't change the font color of cisco IP Phones registered to a CUCM, but the discussion were few years ago. So is there now any possibility to at least choose between black and white? Or what ...
hi dear, i want to upgrade our cucm from 10.5, to 11.5, the scenario is we install new cucm 11.5 , so we will have 2 cucm different version running in different server and IP. and we will install it with PCD. the question is, how the new cucm...
hi friends: yesterday i installed 160 CUWL Standard (11.x) to the company CUCM , I used Prime License manger for installing the licenses, actually every thing is went fine, but what i have noticed that, the connection to the ldap sever is lost, eac...
Hi, We have a couple of sx20 (on diferent Regions). I call from one to another and it only TX/Rx at 384kbps video even if i choose a higher call rate. Its a SIP to SIP call on CUCM as Callcontrol. Thanks!
Hello, We have a problem with transferring calls outside. This is how topology looks like: PSTN - SIP - cisco router - SIP - CUCM 11.5 We need to transfer calls thats coming from PSTN, back through PSTN to outside number. This is what is configur...
Hi, I set up a call pickup group in CUCM 8.6 and associated 3 extensions (1001, 1002 and 1003), on the Cisco Ip Phone 3905. When I call from extension 1001 to 1002, while is ringins, I press the "center button" on extension 1003, but nothing happen...
Does the VG224 running MGCP support T.38? How can we tell if the VG224 supports H323 or SIP? We are trying to setup FoIP and have no clue as to what is needed.
*Apr 18 13:21:36.251: htsp_dsp_message: SEND_SIG_STATUS: state=0xC timestamp=30080 systime=-1606409220*Apr 18 13:21:36.251: htsp_process_event: [0/0/6, FXSLS_ONHOOK, E_DSP_SIG_1100]fxsls_onhook_offhook htsp_setup_ind*Apr 18 13:21:36.251: [0/0/6] get_...
