Data Center and Cloud Knowledge Base

HelloI have a small problem , I have a server UCSC-C220-M3S And I want to know If this PCI card can work on this server ? (UCSC-C220-M3S)The card : N2XX-ABPCI01 - Broadcom 5709 Dual-Port Ethernet PCIe Adapter .Please Assist

HI All,I'm hitting with an outbound transport failed in CCP.  while adding the Vcenter, UCSM.I have re-rechecked users credentials of the users I have created.Please have a look on my issue screen shot:Thanks&Regards,Mugundan.R

IntroductionIssuesRelated Information  IntroductionThis document helps in troubleshooting issues related to High availability configuration on ACE. High Availability (or fault tolerance) uses a maximum of two ACE appliances to ensure that your networ...

Introduction  IntroductionThis document lists various ESX and ESXi commands to troubleshoot n1k issues on UCS. In ESX with a Console OS, these commands are in the /usr/sbin directory. This procedure assumes you have the KVM IP addresses setup and ass...

IntroductionRequirementsNX-OS Software ImagesPreparing for NX-OS upgradeRelated Information  IntroductionThis document provides a review of best practices for NX-OS upgrades on the Cisco MDS 9000 series switches.  NX-OS release 5.2.x is used as an ex...

This document contains the following operational and troubleshooting aspects of VNMCLocales, RolesExport & Import of policiesBackup & RestoreDiagnostics & Device faults

This document shows creation of the following entities in VNMC:Tenant structureDevice profilesCompute firewallsEdge firewallsCompute and Edge security profiles

The document shows the installation sequence and how to connect VNMC with vCenter, VSG, Nexus 1000V VSM, and ASA1000V.

HI All,We hitting erro while adding ADD NETWORK in CCP(CISCO CLOUD PORTAL).I have checked the started Process in CPO(CISCO PROCESS ORCHISTRATOR).We observed the started Process was completed successfully and finaly we hitting ("Faut Encountered asign...

IntroductionCoPPExampleRelated Information   Introduction Cisco Nexus 7000 Series Switches offer one of the most comprehensive data center network feature sets in a single platform. As ping is a common tool used to test connectivity in networks, it  ...

Nexus 5010/5020 are Unified fabric switches which support Ethernet and Fibre Channel over Ethernet(FCoE). In Nexus 5010/5020, by default, class-default ethernet traffic goes into a separate drop class queue(qos group 0) and FCoE traffic goes into a n...

Build rpm with --target sletc11sp1

Performing a Factory ResetThere are multiple methods available to perform a factory reset:When logged in with HIGH privileges (admin).  Gnome Control Center -> Device Settings -> Advanced -> Factory ResetG-key - Hold the 'g' key on the keyboard while...

IA TAC Developed=================How to register for software updates - https://supportforums.cisco.com/docs/DOC-23916How to open a case - https://supportforums.cisco.com/docs/DOC-25256Cisco General TAC=================Main Support Site - http://www....

Latest how to create a ticket for customers only. -6/21/2012