Data Center and Cloud Knowledge Base

IntroductionServer Load BalancingReal Servers and Server FarmsSticky Load balancingTerminating SSL on ACE for ActiveSyncRelated Information  IntroductionExchange ActiveSync offers end users with low bandwidth and high-latency devices such as cell pho...

Hi       My customer is only using SNMPV2 on the Nexus 7000, but they got a SNMPV3 user everytime when they create a user on the Nexus switch, becauseof  the AAA/SNMP sychronization feature. Anybody knows how to disable this V3 user account on the ne...

Problem Description: A 2248TP-E FEX does not come online when connected to Nexus 7000 running 6.0x code. The state of the FEX will show as 'image download'. Below is an example from a N7K running 6.0(3). N7K# sh fex detailFEX: 101 Description: FEX010...

Hi: all      I have a route leaking question on N7K VRFs. I created two VRFs on N7K, and need to control the route leaking between them. I successful did it with "export map  ****" command, but when I use the "import map ****", it is not working. fro...

Hi:I am stuck on a EBGP configuration. The scnario consists of two VDC on N7K directly connected with a 10G cable. The configuration is as follow:1) I created VRF A on VDC A, and allocated interface ehternet 9/5 as the VRF A member with IP address 19...

IntroductionVSM and VEMRecovering Network ConnectivityRemoving a Port ProfileObtaining a File of Core Memory InformationRelated Information  IntroductionThis document describes a procedure that can be used to recover an ESX or ESXi host that has beco...

After replacing UCS Blade Server Chassis, Chassis ID may be changed.If so, Chassis ID can be reclaimed by the following steps.1. Decommission Chassis.2. Right click on the chassis in Decommissioned tab, then select Recommission Chassis.3. Select the ...

Introduction  Introduction Ozden Karakok is a Technical Leader at Global Technical Center in Europe. Ozden has been with Cisco for twelve years. She specializes in Storage Area and Data Center Networks. She worked as an escalation engineer in the Cis...

TES 5.3.1: Poor Client Performance When connecting to Oracle Database.  Possible fix for poor performance when connecting to a Oracle Database

IntroductionHealth MonitoringRequirements and ConsiderationsConfigurationVerifyRelated Information IntroductionHealth monitoring on the ACE tracks the state of a server by sending out probes. In case of out-of-band health monitoring, the ACE verifies...

IntroductionFabric Login (FLogi)Virtual SANs (VSANs)ZonesEnabling Enhanced ZoningModifying Zone DatabaseTroubleshootingZoning Lock and Lock OwnersChanging back to Basic ZoningRelated Information IntroductionEnhanced zoning enables to perform all conf...

The purpose of this document is to provide the information necessary to carry out the fabricpath design and implementation and testing in an enterprise environment. The main focus for this document is to provide a tested result of Classical ethernet ...

IntroductionACL memory overview and resource allocationRecommendation for ACL resource allocationReducing ACL memory usageRelated Information  IntroductionACL memory on the ACE module is used for programming traffic processing policy in the data plan...

HelloI have a small problem , I have a server UCSC-C220-M3S And I want to know If this PCI card can work on this server ? (UCSC-C220-M3S)The card : N2XX-ABPCI01 - Broadcom 5709 Dual-Port Ethernet PCIe Adapter .Please Assist

HI All,I'm hitting with an outbound transport failed in CCP.  while adding the Vcenter, UCSM.I have re-rechecked users credentials of the users I have created.Please have a look on my issue screen shot:Thanks&Regards,Mugundan.R