Hi everyone !!!We have new CUCM ver 10.5.1.10000-7 platform, on a HA schema with one Publisher and one SubscriberTo implement a intecompany connection to an external PBX, with configured the Route Pattern 3XXXX pointing to our voice gateway.But our...
Is there a way in CDR reports to get a report of incoming calls on SIP trunks?I was trying to do a gateway detail report which lists the calls onselected gateways, and has the number called, the calling number, etcbut under gateway types there is not...
Hello Team, Recently I have configured call manger 9.1 and my all configuration are perfect. when I am dialling from my IP phones all calls are going outside perfectly. but outside calls are not coming to IP Phone. when I am run command "debug isd...
Hi,we seem to have acquired a delay in outgoing calls. Internal 4 digit dialling etc is instant but all outgoing (prefixed with 9) calls take an age to connect.I realise this may be down to an overlapping route pattern but I'm no expert in this. Our ...
I have a CCM version 4.1(3) environment. Two of our 7940G phones have developed the same issue. Upon boot-up, the phones display Universal Application Loader at the top of the screen with the following message, "Ethernet disconnected." The phones ...
Am trying to connect two CUCM clusters using two CUBEs. Any one with document on how to Configure this. Anything to lookout for?
On a 99xx series phone, I can't see how to dial a URI. The manual at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/10_0/english/userguide/P567_BK_UB293500_00_userguide-8961-9951-9971-10_0/P567_BK_UB293500_00_userguide-8961-...
I have a C4507 core switch that because of a NEC phone system we are having some issues with calls. What I need to do is to shut off the arp IP monitoring on the switch. I have the command monitor event-trace arp and want to know if disable will stop...
Hi GuysI have a alarm in the UCS240 . The System status LED Amber is blinking, but in the vCenter nothing appears abnormal.Please see the captures:-System Event-System Status- CPU- Memory- Storage-Temperature-Platform AlertTIACristian
Hi, i've a cisco 7861 phone with cucm 9.1.I want to use the BLF function with this phone. We use this phone at the reception and they want to know which employee is talking with someone. i saved a few numbers in the number block on right sight - butt...
Dears, we need to translate the calling number of our Tele Marketing team to be unknown, kindly your support to fix this issue. Regards,
Hello,I must set the diffserv Protocol on Catalyst 4500 for voip, I will need your help in choosing the protocolThank you in advance Amine
Hi We are using Cisco 2900 Router where IOS "c2900-universalk9-mz.SPA.152-3.T1.bin " is used , where sh ip int br show Serial 0/0/0:15 is down down...we checked with the Telco they used PRI meter & confirmed that there is no issue from there end ...n...
Hello I have a setup where the two ends of link are routers conencted to PABX Trunk dialling is required but when then call there is a message "Call Cannot be completed" before the call is actually forwarded and established fine. Any advise as to how...
Hello againI have here small problem about the voice I have here cisco CME 2921 And Cisco ip communicator the problem i can send the call but i cant recieve any call my study its not voice its service provider and routing i think i have problem in my...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-17-2025 12:16 PM | ||
| 06-17-2025 08:52 AM | ||
| 06-17-2025 07:43 AM | ||
| 06-17-2025 06:11 AM | ||
| 06-09-2025 09:11 AM |
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
