Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello All,We are running Call Manager 8.5 and are getting a complaint that the tones that play when there is no music on hold that let callers know they are still on hold are a problem when there is a conference call and someone puts their phone on h...
Hello,What type of licenses (Enhanced / Basic / Essential) do I need for a 7906 phone? And for a Basic third party SIP Phone? Thanks!
When the users connect to the paging system there is no audble notification, is there a way to configure this for a FXO MGCP trunk?Thanks
Carrier supposed to be sending sever digits but I don't see it, can't rout the traffic to call manager. Any idea would be appreciated.Thanks
as below article stated the processor memory requirement for 2-port channelized T1/PRI ISDN http://www.cisco.com/en/US/docs/routers/7200/configuration/7200_port_adapter_config_guidelines/3875m.htmli would like to calculate the memory requirement for ...
Hi Guys,I have a query. Let me give you the details,Scenario:A route group contains 2 MGCP gateways. i.e. it contains one port from each gateway. And on each gateway one E1 line is terminated.Route group A -S0/SU0/ds1-0/1 from R1 (Router 1) -S0/SU0/d...
Hi,Does router 2911 with ios 15.2T4 configured as SIP SRST support ip phone 6945 registered SIP with cisco call manager 8.5.If yes, can anybody help me on the configuration on the router.Thanks,Haitham Taha
Dear all,When an incoming call rings on a Cisco 2921 FXO port, the caller hears 5 rings before the call is connected. Does anyone know of a way to shorten or eliminate this delay?Please find attached the configuration and sceanario as following:Cis...
I have just begun supporting a CME 7.1 client who has a 7962 phone and a 7911 phone that both share a single line presence (one extension, present on both phones)The 7911 phone shows all directories for missed calls; received calls; placed calls. Ho...
Hi,I need some help in integrating Avaya IP Office with Cisco's UC500. Is this possible? If yes, are there any docu,emts or white papers highlighting this please?Rgds AjaySent from Cisco Technical Support iPad App
HiCisco Presence CUPC clients are not able to use deskphone more while connecting through wireless.Is it mandatory, users PC/Laptop has to be connnected to backside of Phone port, inorder to use deskphone mode on CUPC ?When we enabling and disabling...
I configured Extension Mobility with the following URL:http://172.28.8.8:8080/emapp/EMAppServlet?device=#DEVICENAME#But getting the 404 error. I have an ASA then a Switch between the gateways, could it be something in the ASA? Maybe a DNS issue. I am...
Hello Everyone!We are currently upgrading from CUCM 6.x to 8.6. One of the discussion points has been upgrading our voice gateways (about 200+ of them) from mgcp to h323. I'm a little leery of this given having to manually configure router patterns...
Dear Alli want to change the cisco ip phone logo to my company logo , so i need some helpthank you
HiI have CUPS with System version: 8.6.2.10000-44. At present only one node is installled (ie Publisher)We want to add another node to make it as CUPS cluster.Fist node is upgraded from version 8.5.4-10000 to 8.6.2.10000-44Since it is upgraded, we ...
